JDM B programator

[M4r1hu4n3]

@jankop

Ovšem s ohledem na odlišný algoritmus musí být i podpora ze strany programovacího software.

Tohle je psano na strance odkud mam tu upravu:

The solution I have come up with involves adding just one cheap, common component to the board, and cutting a couple of tracks. It can be installed on the track side of the board in minutes, leaves the programmer compatible with all PIC microcontrollers, and will work with any software written for the JDM. Basically, the 5.1V supply to the chip socket is cut, and the break is bridged with a MOSFET.