PICKIT2 s 18F2550, chyba v MPLAB: PKWarn0003, PK2Error0049

Zdravim,
postavil som si klon PICKIT2 s obvodom 18F2550. S programatorom PICkit2 pracuje zatial bez problemov ale v MPLAB mi to hlasi nasledujucu chybu:

Found PICkit 2 - Operating System Version 2.32.0
PICkit 2 Unit ID = Macros
Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC16F628A is correctly installed in the application. (Expected ID = 0x1060, ID Read = 0x0)
PK2Error0049: VPP Voltage error. Check target and retry operation.
PICkit 2 Ready

Zaujimave je, ze to hlasi iba u tohto obvodu, skusal som este druhy taky isty typ ale detto. Paradoxne s obvodom PIC12F509 to ide bez problemov. Nestretol sa niekto s takymto problemom, lebo ma nic nenapada v com moze byt problem. Nemam nieco nastavene v MPLAB ako ma byt? Nic som ale v nastaveniach dolezite nenasiel.

Dakujem za akekolvek podnety.

:arrow_right: administrator: přejmenováno z "PKWarn0003, PK2Error0049"