Set in code nastavíš, když používáš direktivu __config.
[code] list p=16F628A ; list directive to define processor
#include <P16f628A.inc> ; processor specific variable definitions
errorlevel -302
__CONFIG _LVP_OFF & _BODEN_OFF & _PWRTE_ON & _WDT_OFF & _INTRC_OSC_NOCLKOUT
ORG 0x000 ; Processor reset vector
nop
nop
nop
reset goto init ; Go to beginning of program
ORG 0x004 ; interrupt vector location
;------------------------ BANK 0 -----------------------------------
init
clrwdt
clrf STATUS ; Restore Bank 0
clrf INTCON ; zakaz vsech preruseni
clrf PORTA ; reset outputs for future
;------------------------ BANK 1 -----------------------------------
bsf STATUS,RP0 ; Bank 1
clrf TRISA ; definice I/O
bcf STATUS,RP0 ; Bank 0
loop
bsf PORTA,6
bsf PORTA,7
bcf PORTA,6
bcf PORTA,7
goto loop
END [/code]