tak to predchozi bylo pres redukci usb-rs232
s nativni rs232 je to ok:
Connecting to MPLAB ICD 2
…Connected
ICDWarn0030: MPLAB ICD2 is about to download a new operating system. If MPLAB IDE is just starting, it will appear to “hang” at the splash screen. Please be patient. MPLAB IDE will finish it’s initialization after the OS is downloaded. (Note: You may wish to select to ignore this warning in the future.)
Downloading Operating System
Connecting to MPLAB ICD 2
…Connected
Setting Vdd source to MPLAB ICD 2
ICDWarn0020: Invalid target device id (expected=0x4D, read=0x0)
…Reading ICD Product ID
Running ICD Self Test
…Passed
…Download Operating System Succeeded
Setting Vdd source to MPLAB ICD 2
ICDWarn0020: Invalid target device id (expected=0x4D, read=0x0)
…Reading ICD Product ID
Running ICD Self Test
…Passed
MPLAB ICD 2 ready for next operation
zajimavy je ze vsechno funguje pres tu redukci az na stahnuti toho OS
cim to muze byt, nevite?
// hodilo by se aby to fungovalo i na tu redukci
tak snad to bude ok a uz me to SCPD2 nebude zlobit